przełącznik dedykowany dla sieci Merto Ethernet wyposażony w 48 portów 100BASE-T + 4 1000M SFP, oraz podwójny zasilacz AC, zapewniający pełna redundancję.
Switch zawiera wbudowane funkcje warstwy 3, takie jak: trasy statyczne, protokoły routingu RIP i OSPF. Listy dostępu ACL, zarządzanie pasmem QoS, VLAN z tagowaniem IEEE802.1Q, oraz funkcja VLAN Q-in-Q.
ISCOM-3028F z wbudowanymi funkcjami warstwy 3 rozdziela domenę rozgłoszeń, pozwalając odseparować ruch sieciowy miedzy departamentami, oraz wprowadzić routing miedzy odrębnymi vlan-ami i sieciami.
Layer 2 Switching |
Features |
Forwarding mode |
Store-and-forward Switch |
Max frame size |
Jumbo frame 8000 Bytes |
Port rate limiting |
Based on ingress and egress of each port, 64k increment |
Storm control |
Support storm control of broadcast, multicast and DLF according to PPS |
Port loopback detection |
In case a port is connected to a loop circuit, the port will be shut down automatically; the loop detection period is configurable. |
Multicast |
IGMP Snooping V1/V2/V3 Multicast VLAN Registration (MVR) |
Spanning tree |
STP and RSTP |
Link aggregation |
Up to 6 trunk groups, 8 100M or 4 1000M ports in each trunk 6 types of load-sharing based on MAC and IP address |
Mirror |
Port-to-Multiport morroring, separately mirroring of ingress and egress traffic |
MAC address table |
IEEE802.1D standard address learning MAC address learning function can be enabled/disable on each port 16K MAC address, 100 static MAC address Support MAC address clear/search functionm Show MAC address and MAC address stats. function Flow control IEEE802.3x in full duplex, back pressure in half duplex |
VLAN |
IEEE802.1Q VLAN; 4K active VLAN; Support Q-in-Q function |
Tranparent transmission |
Support BPDU, LACP, 802.1x, GMRP, GVRP, and GARP on per port |
Management Feature |
|
Configuration |
CLI/Telnet/console |
Routing protocol |
Support Static, RIP, OSPF routing protocol Static routing: 1K, Host routing: 4K, Network routing: 16K |
Management |
SNMP/RMON groups MIB1, 2, 3 and 9/Raisecom iEMS NMS Support log system and different alarm notification levels |
Cluster management |
Raisecom Neighbour Discover Protocol (RNDP) Raisecom Topology Discover Protocol (RTDP) Raisecom Cluster Management Protocol (RCMP) Raisecom cluster network management program |
Download and upgrade |
Support X-modem and FTP upgrade in BOOTROM mode Support uploading, upgrading system and configuration files through FTP/TFTP |
Schedule |
System tasks executed periodically or at appointed time |
Time management |
Time and zone management, summer time, SNTP and SNTP server |
Error tolerance |
System error report, immediately recover in case of serious system error |
Advanced feature |
QoS |
Support CAR (Committed Access Rate) function at 1M increment Up to 8 output queues Support VLAN ID replacement based on flow Support 2K data flow queues at maximum Support IEEE802.1p and DSCP PRI remark Support QoS Profile management, customized QoS proposal Support re-mark function based on port ID, MAC address, VLAN, IEEE802.1p priority, diffServe and IP TOS |
Queue schedule algorithm |
Strict Priority (SP), Weighted Round Robin (WRR) and Bounded delay schedule modes |
ACL |
Support L2 - L7 packet filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range and illogical frames filtering. |
Security policy |
ACL (Access Control List) function User classification and user name/password protection Support AAA & Radius authentication Support MAC address and port binding Prevent DoS attack Maintenance Support debug information print Support PING (Packet Internet Groper) Support Telnet client |
Default password restoration |
Support |
Specification |
Performance |
Switching fabric 19.6Gbps |
Capacity |
64MB SDRAM 4/8MB flash 32MB DDR Switch buffer 16K MAC address 1K IGMP groups |
Management port |
1 console (RJ45) |
Serial port configuration |
9600bps/8bit/none parity/1stop bit/none flow control |
Port specification |
10BaseT (RJ45, Cat3/Cat4/Cat5 UTP) 100BaseT (RJ45, Cat5 UTP) 1000Base-LX/BX/FX LC fiber connector, single/multi mode) Fixed port 48 (10/100BaseT) 4 1000M SFP optical modules |
Indicators |
Power Supply System (flashing) FDX for each port LINK/ACTIVE for each port |
Dimension |
442(W)*366(D)*1U(H)mm |
Weight |
8kg |
Power supply |
AC: 90~264V, 47~63Hz DC: 36~75V |
Power consumption |
≤ 70W (at max load) |
Working ambience |
Temp: 0~50 centigrade RH: 5~95% non-condensing |
Storage ambience |
Temp: -25~85 centigrade RH: 20~90% non-condensing |
Safety compliance |
CE FCC Class A |
Compliance |
Standards & protocols |
IEEE802.1w IEEE802.1X IEEE802.3adn IEEE802.3x full duplex on 10BaseT, 100BaseTX IEEE802.1D Spanning Tree Protocol IEEE802.1p CoS Prioritization IEEE802.1Q VLAN IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE 802.3ab 1000BASE-T IEEE802.3z 1000BaseX 1000BaseBX 1000BaseSX 1000BaseLX/LH 1000BaseZX RMON I and II standards SNMPv1/v2c/v3 |